navigation bar

Please register
Subscribe to ezine
Bookmark this site
Quick navigation
 

News

New Castle Richmond 3i - A Classic Improved (2/8/2004)

The new improved Castle Richmond 3 - the Richmond 3i - will be available in Castle retailers from August onwards at a cost of £320 per pair.

The Richmond has been in successful production for over 10 years and as such can genuinely be described as a classic.

The new improved Richmond 3i features improvements in virtually all areas over the previous model. The result is a smoother more open balance with a weightier low end.

The cabinet volume has been increased to allow an improved bass response and better alignment.

The cabinet has been damped with bituminous pads to reduce colouration and character - an unusual feature at this price of loudspeaker.

The 130mm carbon fibre coned bass/mid driver has a larger magnet, increasing shove and delivering more control with improved dynamics.

The chassis of the bass/mid driver is cast aluminium alloy that is far more rigid than the usual plastics materials and is not ferro-magnetic like steel baskets that can reduce flux in the gap: sapping vital dynamics and potentially increasing the effects of signal induced flux modulation.

The 19mm low-modulus polyamide-domed HF unitās production techniques have improved sensitivity and consistency.

The crossover has been completely revised delivering a smother response, improved drive unit integration and an easier load.

The terminal panel is now stiffer reducing potential resonances and allows traditional wiring, bi-wiring or bi-amping.

Castle Acousticsā Sales and Marketing Director Fred Clayton commented that he was "confident that the new Richmond 3i would surprise quite a few retailers as to, just how much the new loudspeaker had improved over its predecessor."

Specifications

Frequency Response 60Hz-20kHz
Nominal Impedance 8 ohms
Sensitivity 88.5dB for 1w at 1m
Amplifier Requirement 15-75 watts
System Type Reflex
Bass Unit 130mm (5 in.) woven carbon fibre cone, cast chassis
Treble Unit 19mm (.75 inch) low modulus polyamide dome
Dimensions Height 330mm (13.2 in.)
Width 170mm (6.8 in.)
Depth 230mm (9.2 in.)
Weight Each 3.9kg (8.6 lbs)
Weight Packed 9.0kg (19.8 lbs) pair

www.audioplus.co.uk/castle.htm


 
home | ezine | directory | resources | about us
use our newsfeed | subscribe to ezine | submit a link | advertise | link to us

Whilst every effort has been made to ensure the accuracy of all articles, advertisements and other insertions
in this website, the publisher can accept no responsibility for any errors or omissions or incorrect insertions.
The views of the contributors are not necessarily those of the publisher or the advertisers.